Using the Control Panel to Make Printer Settings | 64
Default: [
0.0.0.0
]
IPv4 DDNS
Specify the setting to update the host or domain name.
Default: [
On
]
DHCP
You can specify whether or not to use DHCP in an IPv4 environment.
Default: [
On
]
IPv4 Address
You can specify the printer's IPv4 address.
When DHCP is set to on, the IP address cannot be changed. To change it, set
DHCP to off.
Contact your network administrator for information about the network configuration.
Default: [
11.22.33.44
]
IPv4 Subnet M.
You can specify the subnet mask.
When DHCP is set to on, the subnet mask cannot be changed. To change it, set
DHCP to off. Contact your network administrator for information about the network
configuration.
Default: [
0.0.0.0
]
IPv4 Gatewy.Ad.
You can specify the IPv4 gateway address.
When DHCP is set to on, the gateway address cannot be changed. To change it,
set DHCP to off. Contact your network administrator for information about the
network configuration.
Default: [
0.0.0.0
]
IPv6 DDNS
Specify the setting to update the host or domain name.
Default: [
On
]
IPv6 DNS
Specify the DNS server settings under IPv6.
If DHCP is off, enter the IPv6 addresses for the primary and secondary DNS
servers in the form "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx" (where each x
represents a digit).
Default: [
::
]
DHCPv6
You can specify whether or not to use DHCP in an IPv6 environment.
