Sawgrass Virtuoso SG400EU User Manual Download

Page: 93 / 135

Maintenance | 85

Checking the remaining ink level via PowerDriver

PowerDriver on Windows OS can also be used to check ink levels.
See

sawgrassink.com

for more information.

Replacing an Ink Cartridge

Clear any errors, such as when there is a paper jam or when no paper is loaded, before
replacing an ink cartridge.



When removing the ink cartridge, do not touch the inside of the printer.



Carefully install an ink cartridge in the correct position.

1. Take the ink cartridge out of the box.
2. Open the right front cover.

3. Take out the empty cartridges.

While taking out the cartridges, be sure to hold the printer firmly so that it does not
move.

4. Check the cartridges' orientation, then install them carefully.

Install in the following order from the left: black, cyan, magenta, and yellow.

5. Push each cartridge fully in.

Summary of Contents for Virtuoso SG400EU








































































































































Search results

Summary of Contents for Virtuoso SG400EU

Reviews:

Related manuals for Virtuoso SG400EU

Brands by name

Popular brands

Sawgrass Virtuoso SG400EU, User Manual

Search results

Summary of Contents for Virtuoso SG400EU

Reviews:

Related manuals for Virtuoso SG400EU

Brands by name

Popular brands