Using the Control Panel to Make Printer Settings | 61
5. Press the [ ] or [ /Menu] key to set the time zone, then press the [#Enter] key.
6. Press the [Escape] key.
De-condensation
If the SC57000 error message appears, there might be condensation inside the printer. Dry
the printer's interior by performing the de-condensation procedure. See page section
"Printer Errors" for more information.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], then press the [#Enter]
key.
3. Press the [ ] or [ /Menu] key to display [De-condensation], then press the
[#Enter] key.
Three sheets are fed through the printer without anything being printed on them.
4. Turn the printer off, then turn it on again.
If the error message does not reappear, the printer's interior has fully dried.
If the error persists, turn the printer off, leave it for an hour, and then turn it on
again. If this does not resolve the problem, contact Sawgrass.
Using the [System] Menu
Energy Saver
Use Energy Saver mode to reduce the printer's power consumption.
You can specify how long the printer remains idle before it switches to Energy Saver
mode. When the printer is in Energy Saver mode, it requires time to start up when it
receives a print job. You can specify between 5 and 60 minutes as the idle time before
switching to the Energy Saver mode.
Date/Time:
Time Zone
Time Zone:
GMT+00:00
Menu:
Maintenance
Maintenance:
De-condensation
