Using the Control Panel to Make Printer Settings | 47
version, attached options, language and remaining ink are printed in this area.
Paper Input
The specified Tray Priority setting and the specified settings in the [Paper Input] menu,
such as the size and type of paper loaded in each paper tray, are printed in this area.
Maintenance
The specified settings in the [Maintenance] menu are printed in this area.
System
The specified settings in the [System] menu are printed in this area.
Host Interface, Interface Information
The specified settings in the [Host Interface] menu are printed in this area.
Language
The selected language in the [Language] menu is printed in this area.
Using the [Maintenance] Menu
Use the [Maintenance] menu to specify printer maintenance settings.
Nozzle Check
Print a test pattern to check that print head nozzles are printing properly.
If nozzle blockages occur, ink cannot be ejected properly. This will result in poor print
quality.
Head-cleaning
Clean the print head if the test pattern indicates the nozzles are not printing properly.
Head cleaning consumes ink but is sometimes necessary to achieve a full nozzle
check.
Perform a head cleaning up to five (5) times.
Print and check for any changes in the nozzle check test pattern between each head
cleaning.
Head-flushing
Perform a more thorough head cleaning if print head nozzles cannot be cleared by up
to five (5) head cleanings.
Head flushing consumes more ink than head cleaning.
Do not perform more than one (1) head flush.
If nozzles do not print properly after five (5) head cleanings and one (1) head flush,
contact Sawgrass for assistance.
