Troubleshooting | 113
Make sure that the paper size selected in the [Print On:] list of the [Printer Properties]
dialog box matches the size of the paper loaded.
Is there a printer error?
View the display or Web Image Monitor to check whether an error has occurred.
Is the correct paper size selected in the design software and printer driver?
Make sure that the paper size selected in design software and printer driver matches the
size of the paper loaded.
Does the computer meet system requirements?
Check that the computer being used meets system requirements.
See section “System Requirements” for more information.
Error & Status Messages on the Display
This section explains what the messages that appear on the display mean and what to do
when a particular message appears.
Depending on the "Auto Continue" settings specified on the [System] menu, some of the
following messages might not appear. See section "Using the [System] Menu" for more
information.
Error Messages
Cannot recover error page(s) / FormFeed to print remaining
The printer confirmed that the error has been cleared and printing has resumed. However,
some page(s) did not print.
To continue printing, press the [Form Feed] key and print the missing page after the print
job is finished. To delete the print job, press the [Job Reset] key.
See section "Cannot Recover Error Page" for more information.
Cannot use High Temp. / Power Off On
The temperature is abnormally high.
Check the installation area and relocate the printer. Alternatively, wait until the printer
acclimates to the room temperature.
See section "Out of Printable Temperature Range" for more information.
Cannot use Low Temp. / Power Off On
The temperature is abnormally low.
Check the installation area and relocate the printer. Alternatively, wait until the printer
acclimates to the room temperature.
See section "Out of Printable Temperature Range" for more information.
