Setup and Installation | 19
Do not touch the prongs of the power cable's plug with anything metallic.
Do not handle the power cord plug with wet hands.
The supplied power cord is for use with this printer only. Do not use it with other
appliances.
Do not use power cords that are damaged, broken, or modified. Also, do not use
power cords that have been trapped under heavy objects, pulled hard, or bent
severely.
If the power cord is damaged and its inner wires are exposed or broken, contact
Sawgrass for a replacement. Use of damaged power cords could result in fire or
electric shock.
Be sure to locate the printer as close as possible to a wall outlet. This will allow
easy disconnection of the power cord in the event of an emergency.
Locate the printer as close as possible to a wall outlet. This will allow easy
disconnection of the power cord in the event of an emergency.
Be sure to push the plug of the power cord fully into the wall outlet. A partially
inserted plug may create an unstable connection that can result in unsafe buildup
of heat.
When disconnecting the power cord from the wall outlet, always pull the plug, not
the cord. Pulling the cord can damage the power cord.
(mainly Europe and Asia)
SG400EU
220-240 V: 50/60 Hz 0.6 A
SG800EU
220-240 V: 50/60 Hz 0.6 A
(mainly North America)
SG400NA
100-120 V: 60 Hz 1.0 A
SG800NA
100-120 V: 60 Hz 1.2 A
