Sanyo 85402843, Service Manual

Page: 59 / 252

6 - 13
Mini ECO-i System
Service Checker
6. Setting Mode
6
Fig. 7
Setting mode 2
Press the (CHECK) button, ( S ET)
button and the (CANCEL) button simultane-
ously for 4 seconds or longer.
Press the temperature setting /
buttons to change the item code. The item codes
and setting data are shown in the table on the
next page.
Press the timer time / buttons to change
the setting data.
To confirm the changed setting data, press the
( S ET) button.
(At this time, the ( S ETTING) display
stops blinking and remains lit.)
( S ETTING) blinks when this mode is
engaged, and the address of the outdoor unit that
is being set “ S ystem XX-YY” ( S ystem XX = S ys-
tem address, YY = 1), the item code No. (values
from the table in the next page), and the corre-
sponding settings data (6 digits) are displayed.
The item code number (values shown in the table
in the next page) and the corresponding setting
data (6 digits) are also displayed. (The 6 digits of
the setting data are displayed by changing
between the first 3 digits (Fig. A) and the last 3
digits (Fig. B). When the first 3 digits are dis-
played, the bottom dot of the colon is illuminated.)
To exit setting mode, press the (CHECK)
button. Returns to normal display mode.
(A) Display of first 3 digits
(B) Display of last 3 digits
Refri g erant ty p e : (A) a n d (B) are di s played alter n ately.
The example here (000, 410) i n dicate s R410A.
06-408 Mini_ECOi_SM6 11/10/06 5:22 PM Page 13
获取更多资料
微信搜索蓝领星球