Samsung SHR-2040P User Manual Download Page 122

Page: 122 / 178

9-18

●

FAVORITE Button

- If you press FAVORITE, the FAVORITE window will be activated.

If you click the current FAVORITE, the cameras saved in

the current setting value will be displayed in the screen.

You may delete the selected FAVORITE or all FAVORITE

setting values.

You may set up a new FAVORITE number and name.

Change FAVORITE at the set intervals.

Note

- The FAVORITE button is available only when you contact SITE.
- The FAVORITE information setting value is saved in the Config file even after you are

away from the SITE.

- If you change the DVR list composing the SITE from Setup, the FAVORITE setting value

will be initialized

Summary of Contents for SHR-2040P



















































































































































































Search results

Summary of Contents for SHR-2040P

Reviews:

Related manuals for SHR-2040P

Brands by name

Popular brands

Samsung SHR-2040P, User Manual

Search results

Summary of Contents for SHR-2040P

Reviews:

Related manuals for SHR-2040P

Brands by name

Popular brands