Samsung SHR-2040P User Manual Download Page 138

Page: 138 / 178

9-34

Note

- The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not

supported at the System Password input.

- Use the BACKSPACE key to delete the contents.

Note

Default System Password is set to 4321.

Note

- If you change the Data/Time value, SHR-2040/2041/2042 automatically cuts the

connection with Smart Viewer to apply the new time setup.

- Upon completing the new time setup for SHR-2040/2041/2042, you are permitted

to resume the connection with the Smart Viewer.

- But, Display Format or DST can be set without the disconnection.

- Date/Time

Data/Time is used to set the information of Date, Time, Format, and DST for
on-line SHR-2040/2041/2042.

Caution

System Password shall be composed of numeric only, up to 8 digits.

Summary of Contents for SHR-2040P



















































































































































































Search results

Summary of Contents for SHR-2040P

Reviews:

Related manuals for SHR-2040P

Brands by name

Popular brands

Samsung SHR-2040P, User Manual

Search results

Summary of Contents for SHR-2040P

Reviews:

Related manuals for SHR-2040P

Brands by name

Popular brands