Samsung SHR-2040P, User Manual

Page: 63 / 178

5-16
3
Monitoring
●
Event Monitoring
It is possible to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous.
①
Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁
3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
Sequence mode.
➂
Continuous : The Event Monitoring screen remains alive until you press the “Alarm”
button in the front to cancel the screen manually.
●
OSG Display
①
Date : The date is displayed on the screen when it is On, and not displayed when it is Off.
➁
Time : The time is displayed on the screen when it is On, and not displayed when it is Off.
➂
Cam name : The Cam name is displayed on the screen when it is on, and not displayed
when it is off.
➃
Status : Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.
●
Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it.
Spot Out channel supplies two functions, continuous monitoring of only one channel and
Auto Sequence to display all the channels one by one.
①
Auto Sequence setup ranges from Ch1 to Ch 4.
➁
In the Auto Sequence mode, Spot Out channels are displayed in turn.
➂
Duration time for Auto Sequence is as same as set for Camera setup.
●
Spot Out Event Monitor
Sets if event monitoring will be executed for Spot Out channels.
①
Off : The event monitoring dose not operate in the Spot Out channel.
➁
3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
Sequence mode.
➂
Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm”
LED in the front manually.