Samsung SHR-2040P User Manual Download Page 155

Page: 155 / 178

SHR-2040/2041/2042 USER’S MANUAL

9-51

2.Network Modes - ADSL

- If DVR(SHR-2040/2041/2042) is connected to the ADSL, set the network

mode to ADSL.

- If the ADSL connected to DVR(SHR-2040/2041/2042) uses Static IP, select

Static IP in the Address Type and input the name and IP Address of
DVR(SHR-2040/2041/2042).

- You should select a PORT in accordance with the PORT number set at the

DVR(SHR-2040/2041/2042) network menu.

- If the Dynamic IP has been allocated for the LAN that connected with

DVR(SHR-2040/2041/2042) through the DHCP, select DHCP in the Address
Type and input the name and MAC address of DVR(SHR-2040/2041/2042).

- You should select a PORT in accordance with the PORT number set at the

DVR(SHR-2040/2041/2042) network menu.

Note

- DVR may be named in both English and Korean with the maximum 15 letters.
- The login password should be same to the network password for SHR

2040/2041/2042 to connect.

- To add a new DVR, input all the information required.

Summary of Contents for SHR-2040P



















































































































































































Search results

Summary of Contents for SHR-2040P

Reviews:

Related manuals for SHR-2040P

Brands by name

Popular brands

Samsung SHR-2040P, User Manual

Search results

Summary of Contents for SHR-2040P

Reviews:

Related manuals for SHR-2040P

Brands by name

Popular brands