Opening printing preferences
78
3. Printing
Hole Punch Options
This option allows you to specify the number of hole punches and the hole
punching position. Holes are punched in the printouts for filing them. This
option is available only when the optional punch kit is installed in the optional
standard finisher or booklet finisher.
•
Hole Punch:
Select the number of hole punches between
2 Hole
and
3
Hole
. Depending on the punch kit,
4 Hole
would appear instead of
3 Hole
.
•
Position:
Select the position of staples among
Left
,
Right
and
Top
.
When you use the staple and punch together, you can only set the same
position for staples and punch holes.
•
Output Tray Options:
This option allows you to specify the tray where to
output the printed documents.
Folding Options
This option allows you to print documents folded into three parts (tri-fold). You
can adjust the following options when using the
C-Folding
function:
•
Outside, Top
: Prints the content on the outside of the tri-fold paper. The
machine folds the bottom of the page to form the inner flap and the top of
the page to form the outer flap.
•
Outside, Bottom
: Prints content on the outside of the tri-fold paper. The
machine folds the top of the page to form the inner flap and the bottom of
the page to form the outer flap.
•
Inside, Top
: Prints the content on the inside of the tri-fold paper. The
machine folds the top of the page to form the inner flap and the bottom of
the page to form the outer flap.
•
Inside, Bottom
: Prints the content on the inside of the tri-fold paper. The
machine folds the top of the page to form the inner flap and the bottom of
the page to form the outer flap.
•
Sheet per Set
: Specifies the number of sheets to include in each set when
using the
C-Folding
option. You can include up to 3 sheets in each set.
•
Reset
: Restores all the default options.
Output Tray Options
This option allows you to specify the tray where to output the printed
documents.
