6 .10
Once the AWRT10RF
Thermostat has joined the
network, the screen will
show PAIRING- - - with a 5
minute countdown timer .
After pairing is complete,
a confirmation screen
is displayed for 3
seconds, the AWRT10RF
Thermostat enters the
parameters set up mode .
The display will show
PAIR: RCV2 with P
01 indicating it is in
the parameter set up
mode . Cn (Connected)
indicates that the
AX10RF Receiver is
paired and connected .
Step 3. Press the key to exit setup and start normal operation . The AWRT10RF Thermostat
display will show the current date & time, target temperature and current room temperature along
with indicates for the temperature mode, internet and network status . The red LED backlight on
the Auto/Manual switch will not be flashing .
Step 4. Press the pairing button on the AC10RF Coordinator to exit pairing mode and
begin normal operation .
Auto
Manual
On
Off
Section 6
AWRT10RF Pairing without Internet
Connection (AC10RF Coordinator)
Summary of Contents for AX10RF
Page 1: ...Wireless Controls System Guide As of December 31 2018...
Page 4: ......
