4 .11
Step 4. On the SALUS Smart Home
application, check the boxes for both the
AWRT10RF Thermostat and the AX10RF
Receiver . Press “Connect equipment” .
Step 5. Enter a descriptive name for each device .
Press “Next” to continue . Since the receiver is
already paired, when the AWRT10RF Thermostat
is renamed it will immediately go to the home
screen, ending parameter setup
Step 6. After naming the devices,
the application will show that set
up is complete . Press Finish to
finalize the application setup .
If you do not rename the AWRT10RF Thermostat in the
SALUS Smart Home application, the device may stay in
parameter setup mode. Press the key to exit setup.
AX10RF(RX1)
AWRT10RF-1
AX10RF(RX1)
AWRT10RF-1
Section 4
AWRT10RF Pairing with
Internet Connection (SG888ZB Gateway)
Summary of Contents for AX10RF
Page 1: ...Wireless Controls System Guide As of December 31 2018...
Page 4: ......
