6 .5
Once the AWRT10RF Thermostat joins a network, the icon will
stop flashing and the network channel will be briefly displayed .
After that, PAIRING- - - is displayed with a 10-minute countdown
timer showing the time allowed for the remaining pairing steps .
Step 3. Use the and
keys on the AWRT10RF
Thermostat to switch from
RLAY_CTL to RDTR_VLV . Press
SELECT to initiate pairing .
The AWRT Thermostat
will display the Valve
ID number and a 10-
minute timer showing
how much time is left to
finish pairing .
As each ARV/AVA Valve
Actuator is paired with
the AWRT Thermostat,
the ID number displayed
on the screen will
increment .
If the user presses the
key, the timer times
out or 6 valves have
been paired, the display
will read “RD_VLV
PAIRED” for 3 seconds .
JOINING- - - is displayed with a 10 minute countdown
timer to show the remaining time available to
complete the next steps . The icon will flash at the
bottom of the screen indicating that the thermostat is
searching for a network to join .
Section 6
AWRT10RF Pairing without Internet
Connection (AC10RF Coordinator)
Summary of Contents for AX10RF
Page 1: ...Wireless Controls System Guide As of December 31 2018...
Page 4: ......
