6 .8
Once the AWRT10RF
Thermostat has joined the
network, the screen will
show PAIRING- - - with a 5
minute countdown timer .
After pairing is complete,
a confirmation screen
is displayed for 3
seconds, the AWRT10RF
Thermostat enters the
parameters set up mode .
The display will show
PAIR: RCV1 with P
01 indicating it is in
the parameter set up
mode . Cn (Connected)
indicates that the
AX10RF Receiver is
paired and connected .
Step 3. Press the key to exit setup and start normal operation . The AWRT10RF Thermostat display will
show the current room temperature, target temperature, relative humidity along with indicators for the
temperature mode and network status . The red LED backlight on the Auto/Manual switch will not be
flashing .
Step 4. Press the pairing button on the AC10RF Coordinator to exit pairing mode and
begin normal operation .
Auto
Manual
On
Off
The AWRT Wireless Radiant Thermostat defaults to Non-programmable mode and doesn’t show
time or date. For details on changing to programmable mode, see Section 8, Parameter Setup.
Section 6
AWRT10RF Pairing without Internet
Connection (AC10RF Coordinator)
Summary of Contents for AX10RF
Page 1: ...Wireless Controls System Guide As of December 31 2018...
Page 4: ......
