background image

R21S

D Y N A M I C   M I C R O P H O N E

O W N E R S   M A N U A L

®

Thank you for purchasing the Samson R21S Dynamic Microphone. The R21S dynamic
microphone brings a high level of accuracy and audio performance to vocal miking appli-
cations.

The R21S is a hand held dynamic microphone that excels in both live performance and
recording applications. Equipped with a linear frequency response for
superior reproduction, it is also designed to withstand high sound pressure
levels. Extremely sensitive, it employs a tight cardioid pattern to reduce feedback.
A special shock-mounted element minimizes handling noise and provides
additional protection. The R21S also features an on/off switch with a switch lock.

Features
The Samson R21S utilizes state-of-the-art microphone technology and is
engineered to the finest detail. Here are some of its main features:

• Tight cardioid polar pattern minimizes feedback problems and effectively rejects

signals not originating directly in front of the mic capsule.

• Extended range frequency response for optimum reproduction and

exceptionally clear, crisp sound.

• Special shock-mounting allows movement of the mic element to greatly reduce

handling noise.

• On/off switch with a switch lock to protect against performer/speaker accidentally

switching the R21S off.

• Rugged zinc alloy die-casting case ensures reliable performance in even the most

demanding environments.

• Lightweight and compact, the R21S can be mounted on any standard

microphone stand (using the included mic clip) or can be easily handheld
for long periods without inducing fatigue.

• Foam-lined impact resistant carrying case, 18 ft. XLR cable and mic clip included

with R21S single pack. Mic clip included with each mic with R21S 3-pack.

• Withstands high SPLs lending itself to a wide range of miking

situations.

• Ultra sensitive element picks up all of the nuances of any performance.

• Gold plated XLR Connector.

Copyright 2002, Samson Technologies Corp.
Printed November, 2002
Samson Technologies Corp.
575 Underhill Blvd.
P.O. Box 9031
Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888
www.samsontech.com

Summary of Contents for R21S

Page 1: ...ng directly in front of the mic capsule Extended range frequency response for optimum reproduction and exceptionally clear crisp sound Special shock mounting allows movement of the mic element to greatly reduce handling noise On off switch with a switch lock to protect against performer speaker accidentally switching the R21S off Rugged zinc alloy die casting case ensures reliable performance in e...

Page 2: ...nted wind noise Never cup your hand over the microphone grill Operating Notes The R21S will boost bass frequencies when the microphone is between 0 6 inches from the sound source As you move the sound source further away from the microphone the bass response will gradually roll off The R21S has a built in wind screen which protects against most wind and breathing noise Under adverse conditions suc...

Page 3: ...ficantly less handling noise than most other microphones If handheld take care not to cover the any part of the head grille with your hand Be aware of a phenomenon called the proximity effect which causes a noticeable increase in low frequencies bass response when a microphone is close to the audio source This can have positive impact for example it will cause your voice to sound much fuller when ...

Page 4: ...r mic is to inducing feed back Feedback is that characteristic nasty howling sound that occurs when a mic is placed too close to a loudspeaker the signal from the loudspeaker is fed into the mic then into the loudspeaker then into the mic over and over again until an oscillating tone is generated Because the cardioid pattern utilized by the R21S is so good at rejecting signal not coming from direc...

Reviews: