background image

 

 
 
SoundRanger COMPACT 2C 
Model RP1- 40M 
Portable Address System 
User Guide 

 
 
 
 
 
 

Introduction 

 
The SoundRanger COMPACT 2C System is a compact, easy to use way for you to talk to 
any audience anywhere. 
Because it uses radio waves you can use the microphone up to 30 metres away from the 
amplifier and even have the amplifier in another room. 
If you need more volume or wider distribution, you can link together as many COMPACT 2C 
speakers as you like.  
The sound quality is crisp and clear; speech intelligibility is excellent. 
Because the system is DTI approved (to MPT1345), you don’t need a licence and can use it 
anywhere, inside or outside. 
 

Quick Start 

To get the best from the system you really ought to read the instructions, but, if you can’t 
wait, this is what you do: 
 
1) Set the controls on the back panel as follows: 

 

Channel 1 Volume (red knob): 

 

No 3 

 

Channel 2 Volume (green knob):   

Zero 

 

Aux / Cable Microphone (blue knob) 

Zero 

2) Connect the mains lead to a mains socket 
3) Switch the Power switch to on 
4) Switch the microphone on and adjust the volume to suit 
5) Talk directly into the microphone 
 
Yes, it’s as simple as that. 
 

If you need any advice or assistance, please 
contact SoundRanger Ltd on 01737 247571 

Summary of Contents for COMPACT 2C






Reviews: