TX
RX
D
E
C
G
F
G
F
K
A
B
A:
Reset Button
B:
Mini-USB Port
C:
Link Status LED
D:
Video Status LED
E:
Power Status LED
F:
7-17V DC Input
G:
HDMI Input
H:
Video Status LED
I:
Link Status LED
J:
Menu Joystick
K:
Power Status LED
NEED MORE HELP?
SUPPORT FORUM:
http://support.paralinx.net Contains tips, information and all the latest firmware & software updates.
SUPPORT STAFF:
[email protected] or call +01 818-934-1535 (Mon-Fri 9am to 5pm PST - GMT -8)
CONNECT AND POWER YOUR DEVICE
1
2
ON-SCREEN DISPLAY OPERATION
ACE HDMI
QUICK START GUIDE
Paralinx Ace is a zero-delay
wireless video transmission
system designed for the most
demanding cinema, video,
broadcast and UAV production
applications. With a latency of
less than 1ms the Paralinx Ace
transmits 1080p60 4:2:2 video up
to 300ft / 100m line of sight over
the fully certified unlicensed
5.1-5.8ghz band.
Resets all configurable options to their factory settings
This screen displays the status of the wireless receiver, along with
the current video resolution, frequency, and link quality (if connected)
Select Pairing to link your receiver with another transmitter. Once
pairing is activated on the receiver, turn on the transmitter and use a
paper clip to hold the reset button (between the DC input and power
switch) for 1 second and release. The red warning LED and link LEDs
will blink to indicate that pairing is active
Select a video output format from this menu to output a test pattern
over HDMI.
Return to the previous video by pressing left on the ‘Menu’ joystick.
Choose when to display the OSD. By default, the OSD is displayed when
the link is down. "Hidden by default" hides the OSD until it is activated
by the joystick. If "Always show OSD" is selected, the OSD will be
displayed unless deactivated by the joystick
This screen displays the status of the current internal
temperature of the unit
Launch the menu by pressing RIGHT while the OSD is active. Exit
the menu by pressing LEFT
Launch the status screen by depressing the Joystick (J), and cycle
through the screens by pressing the Joystick up, down, left or right
PAIRING
OSD SETTINGS
Displays the model and serial number
STATUS SCREENS
MENU OPERATION
MAIN STATUS
TEMPERATURE STATUS
TEST PATTERN
RESET ALL SETTINGS
DEVICE INFO
Connect the output from your video source to the HDMI input (G) on the
Paralinx Ace transmitter. Connect either the HDMI output from the Paralinx
Ace receiver to the video input on your monitor.
Connect power to your Paralinx Ace transmitter using the included P-Tap to
Barrel cable. Power the Paralinx Ace receiver with the included A/C adapter
or battery plate accessory. If using a battery plate, connect a compatible
battery to the plate, then connect the short cable from the plate to the
receiver’s DC input (F).
P-TAP TO BARREL
AC ADAPTER
SDI
HDMI
L
L:
Internal Antennas
H
I
J
A
B
C
M
Y
CM
MY
CY
CMY
K
Ace QSG HDMIv3.pdf 1 9/18/15 1:29 PM
