Saia-Burgess
Controls Ltd.
Hardware Manual for the PCD3 Series│Document 26/789; Version E 5│31.01.2005
Hardware
Introduction to I/O modules
5-3
5
5.1.1 Types of connectors and Accessories
Accessories
Type
Designation
Connec-
tor type
PCD3.E009
Empty cassette for covering not used slots
4 405 4957 0 (set of 10)
Plug-in cage clamp terminals 10-pole (up to 2.5 mm²)
Type A
4 405 4958 0 (set of 10)
Plug-in cage clamp terminals 24-pole (up to 1.0 mm²)
Type C
4 405 4959 0 (set of 10)
Plug-in screw terminals 10-pole (up to 2.5 mm²)
Type B
PCD2.K2xx
PCD2.K3xx
To plug in adapters “Ribbon cable to Screw terminals”
with cables PCD2.K23x or PCD2.K22x
Type D
4 405 4999 0 (set of 10)
Plug-in cage clamp terminals 14-pole (up to 1.5 mm²)
Type E
PCD3.K010
Extension plug PCD3↔PCD3, direct side by side
PCD3.K106
Extension cable 0.7 m PCD3↔PCD3
PCD3.K225
Connection cable 2.5 m Web-Server PCD3↔PC
Variants of I/O module connectors (to be ordered seperately)
Plug-in cage clamp terminals
The plug-in cage clamp terminals
simplify the installation significantly.
While the 10-pole clamps support
wires up to 2.5 mm
2
, the 14-pole
clamps are constructed for 1.5 mm
2
and the 24-pole clamps for 1.0 mm
2
.
Type of screwdriver to be used: SDI 0.4 x 2.5 x 80 (max. width: 2.5 mm).
4 405 4957 0 (Type A)
(Set of 10 pcs.)
4 405 4959 0 (Type B)
(Set of 10 pcs.)
4 405 4958 0 (Type C)
(Set of 10 pcs.)
PCD3.K010
���������������������
PCD3.K106
����������������
