Hardware Manual for the PCD3 Series│Document 26/789; Version E 5│31.01.2005
Saia-Burgess
Controls Ltd.
RIOs
Configuration
6-24
6
Events History tab
This tab displays possible disconnections between web server and web browser.
Control field
LEDs
The control field is mainly used to display the PCD3.T76x status LEDs. These show
the current status of the PCD3.T76x; see also section 3.19.6
“Diagnostic information
on RIOs”.
Master connect/disconnect
This button to connect or disconnect the Master is mainly used to remove the PCD3.
T76x from the network, so that it does not “see” either the Master or any other device.
This is used where a different configuration from the Master is required. To prevent
conflicts, the Master must be disconnected.
The “Reconnect Master” button can be used to reconnect the PCD3.T76x to
the network (where the PCD3.T76x is disconnected from the network,
it is not
automatically reconnected
).
Two ways of reconnecting the PCD3.T76x to the network:
●
“Reconnect Master” button
●
Switching the supply to the PCD3.T76x off and on again. On POWER ON, the
PCD3.T76x is reconnected to the Master (default setting).
