- 123 -
MF 5990 - Agoris M943
16 - Safety
Location conditions
By choosing an appropriate location, you will preserve the longevity of the machine. Ensure that the selected
location has the following characteristics:
• Do not install the machine directly on the ground.
• Choose a well-ventilation location.
• Ensure that the air vents located on either side of the machine and at the back of the Duplex module, are not ob-
structed. During installation, ensure that the machine is placed about forty centimetres from any object so as to fa-
cilitate opening of covers.
•
Ensure that this location does not present any risk of emissions of ammonia or any other organic gases.
• The earthed socket (see safety instructions [
121]) to which you will be connecting the machine is located nearby
and easily accessible.
•
Ensure that the machine is not directly exposed to sunlight.
• Do not place the machine in a zone exposed to drafts of air generated by air conditioning, heating or ventilation
systems, or in a zone subject to significant differences of temperature or humidity.
• Choose a stable, horizontal surface on which the machine will not be exposed to intense vibrations.
•
Keep the machine away from any objects that may obstruct the air vents.
• Do not place the machine near drapes or other flammable objects.
• Choose a location where the risks of splashes of water or other liquids are limited.
• Ensure that this location is dry, clean and dust-free.
Precautions for use
Take account of the important precautions below when using the machine.
Operating environment
The following section describes the operating environment required for the machine:
• Temperature: 10 °C to 32 °C [50 °F to 89.6°F] with ambient humidity of between 15 and 80 % (up to 65 % ambient
humidity for a temperature of 32 °C [89.6°F]).
Precautions for using the machine
The following section describes the precautions to be taken when using the machine:
• During printing, never switch the machine off or open its covers.
• Never use gas or flammable liquids, or objects which may generate a magnetic field around the machine.
• When disconnecting the mains cable, always take hold of the plug without pulling on the cable. A damaged cable
presents a potential risk of fire or electrical discharge.
• Never touch the mains cable with wet hands. You risk getting an electric shock.
• Always disconnect the power cable before moving the machine; Otherwise, you risk damaging the cable and cre-
ating a risk of fire or electric shock.
• Always disconnect the mains cable if you do not plan to use the machine for a prolonged period of time.
• Never place objects on the mains cable, and never pull on it or fold it. This may cause a risk of fire or electric shock.
• Ensure that the machine never lies on the mains cable or the communication cables from any other electrical appli-
ances. Also ensure that no cables are inserted into the machine mechanism. This may prevent the machine from
operating correctly or create a fire hazard.
9 March 1999:
Directive 1999/5/EC on radio and telecommunications terminal
equipment and mutual recognition of conformity.
The declaration of conformity can be consulted online at
www.sagemcom.com in the "support" section or may be requested from
the following address:
Sagemcom Documents SAS
- Customer service department
250, route de l’Empereur- 92848 Rueil-Malmaison cedex - France
