MF 5990 - Agoris M943
- 107 -
14 - Maintenance and incidents
7
Check that the levers located on the machine's rear
cover have returned to their initial position, as illus-
trated below:
8
Close the cover of the duplex module.
9
Open and close the access flap to the toner car-
tridge.
Toner cartridge paper jam
1
Remove all paper from the machine's paper output.
2
Press the toner cartridge access button.
3
Lift up the flatbed scanner and open the access flap
to the toner cartridge.
4
Remove the toner cartridge gently by pulling on its
handle and place it on a flat surface.
5
Remove the paper causing the jam without tearing
it. To remove the paper more easily, turn the paper
feed rollers in the same direction as normal paper
transport.
6
Insert the toner cartridge into its compartment,
pushing it fully in until it engages (last movement
downwards).
WARNING
The fuser unit may reach very high tempe-
ratures during operation. To avoid injury, do
not touch this zone.
