Press the “Mode” button to change the mode between switching and PoE. The green LED indicates switching mode
and the yellow LED indicates PoE mode.
In PoE mode, hold down the “Mode” button for three seconds to disable PoE power supply and switch to switching
mode. The LED turns green to indicate switching mode. After power on, the system is powered by PoE power supply
by default.
Specifications
Model M18000-48GT-P-ED
CPU
Quad-core CPU, each core with the clock speed of 1.0G
BOOTROM
8
MB
Flash Memory
512
MB
SDRAM
DDRIII 1 GB
Port Type
48 copper ports, supporting PoE+ and PoE
Transmission
Medium
10/100/1000BASE-T
Cat-5 UTP
LED
Status, Link/ACT, Mode_Led
Button
Changing switching/PoE mode,, and enabling PoE power supply
Hot Swapping
Supported
Power Consumption
No PoE or PoE+ supply: <95W;
PoE supply: <95W+15.4W x N (N stands for the number of PoE ports in use, no greater than
48);
PoE+ supply: <95W+30W x N (N stands for the number of PoE+ ports in use, no greater than
48)
EMC Standards
GB9254-2008 CLASS A
Safety Standards
GB4943-2011
Operating
Temperature
0 to 50°C
Storage
Temperature
-40 to 70°C
Operating Humidity
10%-90% RH (non-condensing)
MTBF 293,000
hours
Weight
Net weight: 4.04 kg
Dimensions
(W x D x H)
399 mm x 440 mm x 40.18 mm
M18000-44SFP4XS-ED
Module Appearance
Figure 0-11 Appearance of the M18000-44SFP4XS-ED Module
External Port
It provides 44 SFP ports and four SFP+ ports. The SFP ports support the rate of 100/1000 Mbps, the SFP+ ports support
10G SFP+ modules and Gigabit SFP modules. Hot swapping of the M18000-44SFP4XS-ED
,
SFP and SFP+ modules is
supported.
The M18000
-44SFP4XS-ED
supports 10G SFP+ and Gigabit SFP modules. 10G SFP+ modules cannot be
used as Gigabit SFP modules.
LED
LED
Identification
on the panel
Status
Meaning
Summary of Contents for RG-N18010
Page 1: ...RG N18000 Series Switches Hardware Installation and Reference Guide V1 08...
Page 89: ...2 RG N18010...
Page 121: ......