Mounting Cable Management Brackets
Make sure the antistatic wrist strap is grounded well and wear the antistatic wrist strap.
The RG-N18010 cable management bracket is mounted before delivery while RG-N18014 not. See the
following steps and figures for installation.
Mount the cable management bracket for RG-N18014
1)
Take out cable management brackets.
2) There three cable management brackets on each side respectively. Pay attention to the direction to mount cable
management brackets, as shown in figure 3-16.
3) Align the screw holes on the cable management bracket with those on the chassis and tighten the screws, as shown
in figure 3-16.
Figure 3-16 Mounting the Cable Management Bracket for RG-N18014
Summary of Contents for RG-N18010
Page 1: ...RG N18000 Series Switches Hardware Installation and Reference Guide V1 08...
Page 89: ...2 RG N18010...
Page 121: ......
