Ruijie Networks RG-N18010, Hardware Installation And Reference Manual

Page: 44 / 144

1000BASE-ZX (1550nm) Single-mode optical fiber
10GBASE-SR (850nm) Multi-mode optical fiber
10GBASE-LR (1310nm) Single-mode optical fiber
10GBASE-ER (1550nm) Single-mode optical fiber
10GBASE-ZR (1550nm) Single-mode optical fiber
XG-SFP-CU1M 1m SFP+ copper cables (DAC)
XG-SFP-CU3M 3m SFP+ copper cables (DAC)
XG-SFP-CU5M 5m SFP+ copper cables (DAC)
100BASE-FX is not supported
LED Status, Link/ACT
Hot Swapping Supported
Power
Consumption
<267W
EMC Standards GB9254-2008 CLASS A
Safety
Standards
GB4943-2011
Operating
Temperature
0 to 50°C
Storage
Temperature
-40 to 70°C
Operating
Humidity
10%-90% RH (non-condensing)
MTBF 200,000 hours
Weight Net weight: 5.06 kg
Dimensions
(W x D x H)
399 mm x 440 mm x 40.18 mm
M18000-44SFP4XS-CB supports 1000BASE-X mode.
M18000-16XS-CB
Module Appearance
Figure 0-30 Appearance of the M18000-16XS-CB Module
External Port
It provides 16 SFP+ ports. The SFP+ ports support 10G SFP+ modules and Gigabit SFP modules. Hot swapping of the
M18000-16XS-CB
,
SFP and SFP+ modules is supported.
The M18000-16XS-CB supports 10G SFP+ and Gigabit SFP modules. 10G SFP+ modules cannot be used
as Gigabit SFP modules.
LED
LED
Identification
on the panel
Status Meaning
Off The module is NOT receiving power.
Solid red The module is faulty.
Solid yellow
High temperature alarm. The system keeps operating
but the performance is affected.
System LED Status
Blinking Initialization is in progress. Continuous blinking