Ruijie Networks RG-N18010, Hardware Installation And Reference Manual

Page: 25 / 144

errors.
Solid green The module is operational
Off The module acts as the standby supervisor module. Primary/standby supervisor
module LED
Primary
Solid green The module acts as the primary supervisor module.
Off No fault
Solid red
The system fails, interrupting functioning of the whole
system or a module; the device may be damaged if it
continues operating.
Fault alarm LED Alarm
Solid yellow
The device overheats, which will affect the system
performance. The system may continue operating.
Off SD card is not installed, or is not connected.
Solid green An SD card is loaded.
SD card slot status LED None
Blinking green Data is being accessed from and written into an SD card
Off
The module is NOT receiving power or is NOT in the
position.
Solid red The module is faulty.
FE module status LED FE
Blinking green
Initialization is in progress. Continuous blinking indicates
errors.
Solid green The fan is operational.
Solid yellow The fan is NOT in the position.
Fan status LED FAN
Solid red The fan is faulty.
Off The power supply module is NOT in the position.
Solid green The power supply module is operational.
Power status LED PWR
Solid red The power supply module is faulty.
Off The DCMI port is NOT connected.
Green The DCMI port is connected at 1000Mbps.
Yellow The DCMI port is connected at 10/100Mbps.
DCMI port status LED None
Blinking The DCMI port is transmitting or receiving data.
Off The MGMT port is NOT connected.
Green The MGMT port is connected at 1000Mbps.
Yellow The MGMT port is connected at 10/100Mbps.
MGMT port status LED None
Blinking The MGMT port is transmitting or receiving data.
Specifications
Model M18010-CM
CPU
Quad-core CPU, each core with the clock speed of 1.0G
BOOTROM 8 MB
Flash Memory 512 MB
SDRAM DDRIII 4 GB
External Port
One Console port;
One 10/100/1000M MGMT port;
One DCMI port;
One SD card slot;
One USB port
Button One Reset button
Power Consumption <40W
Hot Swapping
Supported
Management
Redundancy
Supported
EMC Standards GB9254-2008 CLASS A
Safety Standards GB4943-2011
Operating 0 to 50°C