Removing, Cleaning and Installing Air Filter for Switch Fabric Module
Install and remove the air filter of RG-N18014 switch fabric module:
1)
Hold down the buttons on both sides of the plastic cover and remove the plastic cover.
2)
Loosen the screws on the air filter.
3)
Remove the air filter.
4)
Install air filter and tighten the screws.
5)
Install the plastic cover of the air filter by pressing the buttons on both sides of the plastic cover,
The figure of Installing and removing the air filter of RG-N18014 switch fabric module is similar to figure 7-2.
Install and remove the air filter of RG-N18010 switch fabric module:
1)
Hold down the buttons on both sides of the plastic cover and remove the plastic cover.
2)
Loosen the screws on the air filter.
3)
Remove the air filter.
4)
Install air filter and tighten the screws.
5)
Install the plastic cover of the air filter by pressing the buttons on both sides of the plastic cover,
Figure 7-3 Installing and Removing the Air Filter of RG-N18010 Switch Fabric Module
Summary of Contents for RG-N18010
Page 1: ...RG N18000 Series Switches Hardware Installation and Reference Guide V1 08...
Page 89: ...2 RG N18010...
Page 121: ......
