Ruijie Networks RG-N18010, Hardware Installation And Reference Manual

Page: 79 / 144

Cabinet Mounting
Make sure the cabinet complies with the following conditions:
 Install the switch in a 19-inch cabinet in 4-port form hold.
 Be sure the distance between two square hole strips, one on each side, is 465 mm.
Figure 2-3 19-inch Cabinet
 Be sure that the square hold strip is at least 180 mm far from the outboard front door and the door is at most 25 mm
thick to ensure a minimum available distance of 155 mm. The front door is at least 1000 mm far from the back door,
Figure 2-4 Cabinet Dimensions