Connecting the Power Cord
Connect the power cord to the location as required according to the identification on the AC power module panel,
including RG-PA1600I, RG-PA600I and RG-PA1600I-P.
Make sure the socket is powered off before the power cord is connected.
Connect the AC power cord
1)
Insert the AC power plug into the power module socket.
2)
Take out the anti-loose buckle.
3)
Install the anti-loose buckle on the front panel of the power module
4)
Fasten the anti-loose buckle to the power cord.
5)
Connect the other end of the power cord to an external power socket.
Figure 4-34 Connecting the Power Cord
Please use the 3-pin power cord. The cross-sectional area of each pin is 1.5 mm
2
or 14 AWG minimum.
16A and 10A power cords are available for the RG-N18014
and RG-N18010
AC power supply. Adopt the
proper socket and verify the AC power supply capacity in the machine room.
Connect the power cord to the location as required according to the identification on the DC power module panel,
including
RG-PD1600I and RG-PD600I.
1)
Take out the DC power module and power cord. Insert the DC power plug into the power module socket.
2) Remove the screws on the grounding terminal of the DC power supply with the screwdriver.
Summary of Contents for RG-N18010
Page 1: ...RG N18000 Series Switches Hardware Installation and Reference Guide V1 08...
Page 89: ...2 RG N18010...
Page 121: ......
