Ruijie Networks RG-N18010, Hardware Installation And Reference Manual

Page: 60 / 144

Note: 
PoE power module slot

PoE 3-pin power port

System power module slot
RG-PA1600I-P applies to the host installed with an earlier version than 1.20.
Do not insert the PoE power supply into the system power module slot.
Do not connect the PoE power cord to the system power supply. The 3-pin power port for the PoE module is
on the switch.
RG-N18010 switch provides two PoE power module slots (PoE1 and PoE2) and two 3-pin power ports (port
for PoE1 is the left one of
 marked on Figure 1-45; port for PoE2 is the right one of  marked on Figure
1-45).
LED
LED
Run Alarm Fault
Meaning
Solid green Off Off The module is operational
Off Off Off There is no power input
Blinking green Off Off The module is in standby mode
Solid green Solid yellow Off Persistent overcurrent.
Solid green Solid yellow Off Temperature alarm
Off Off Solid red Over-temperature causes power-off
Off Off Solid red AC is powered off.
Off Off Solid red Short circuit.
Off Off Solid red Output undervoltage
Off Off Solid red Output overvoltage
Solid green Off Blinking red Communication fails