2)
Hold down self-locking lever buttons on both sides of the panel and pull out the lever.
3)
Drag the lever to pull the module out, Before the module is about to be removed from the chassis, support the bottom
of the module with one hand and hold the module with the other hand, so as to prevent the module from falling.
4)
Pull out the levers on both sides of the module. Support the bottom of the module with one hand and hold the module
with the other hand to insert the module into the slot along the rail.
5)
Drive the levers close to the module, and the module will hit the back panel. The module will be fastened after
self-locking of levers.
Figure 7-9 Replacing the Module (for RG-N18014)
Figure 7-10 Replacing the Module (for RG-N18010)
Summary of Contents for RG-N18010
Page 1: ...RG N18000 Series Switches Hardware Installation and Reference Guide V1 08...
Page 89: ...2 RG N18010...
Page 121: ......
