3)
In the Connectivity Note window, type the name of the new connection and click OK. A window appears as shown in
Figure 4-3. In the Connect Using field, select the serial port you want to use.
Figure 0-3
4)
After selecting the serial port, click OK. The Serial Port Parameter Setting window is displayed, as shown in Figure
4-4. Set the baud rate to 9600, data bit to 8, parity check to none, stop bit to 1, and flow control to none.
Figure 0-4
Summary of Contents for RG-N18010
Page 1: ...RG N18000 Series Switches Hardware Installation and Reference Guide V1 08...
Page 89: ...2 RG N18010...
Page 121: ......
