IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001
69
Warning
When GROUND MODE is set to OFF, the DUT, fixtures or
connected instrumentation cannot be grounded. This will short
circuit the internal circuitry during a test.
For ACW and DCW tests, if it is not known whether the DUT
test setup is grounded or not, always set GROUND MODE to
ON.
Only set GROUND MODE to OFF when the DUT is floating
electrically.
Steps
1. Press the UTILITY key on the front panel when the
tester is in EDIT status. The display will go from the
normal EDIT status to the MANU Utility menu for
the
current test.
UTILITY
L I T Y
I
M A U
N
U T
2
M A N U = * * * - 0 0
A R C M D E : O
O
F
F
G R O U N D M O D E :
P A S S H
L D :
O
O F
F
F A I L M D E :
O
P
S T O
M A X H O L D : O F F
N
O
Note
The MANU UTILITY settings only apply to the selected MANU
test.
2. Use the UP/DOWN arrow keys to move the cursor
to the GROUND MODE setting.
