RS PRO 917-6298 Instruction Manual Download Page 190

Page: 190 / 221

IIT-2000/2010/5000/5010 Instruction Manual/English

188

05/08/2015 Version No. 001

AUTO:NAME

Set

Query

Description

Sets or returns the AUTO name for the selected automatic test.

The test must be in AUTO mode before this command can be

used.

Note only alphanumeric characters (A-Z, a-z, 0-9) and the

“_”

underscore character can be used to set the AUTO test name.

Syntax

Query Syntax

AUTO:NAME <string>

AUTO:NAME?

Parameter/

Return

parameter

<string> 10 character string. (first character must be a letter)

Example

AUTO:NAME program1

Sets the AUTO nam

e to “program1”.

AUTO:EDIT:ADD

Set

Query

Description

Add the selected MANU test to the current AUTO number.

Syntax

AUTO:EDIT:ADD <NR1>

Parameter/

<NR1> 1~100

Summary of Contents for 917-6298






























































































































































































































Search results

Summary of Contents for 917-6298

Reviews:

Brands by name

Popular brands

RS PRO 917-6298, Instruction Manual

Search results

Summary of Contents for 917-6298

Reviews:

Brands by name

Popular brands