The Web Browser
43 of 82
Publication S703E V1.1
Issue 06/09
5.5.11
FCU Control - Integral Actuator
The Integral actuator FCU Control screen shows a control and status page for a Q type actuator. The
screen has information relating to the device, its current condition and system parameters. Control of
the actuator is permitted via the control buttons for users with write level access or higher. When not in
communication, the screen may still be visited, but the picture has a large red cross over it to show a
lack of communications.
Navigation
Navigation between the field units is either by returning to the previous screen, or by using the
navigation buttons on this screen. Entering an address directly in the ‘Address’ box and clicking
Refresh moves directly to the selected field unit.
Identification
Tag name
: Identification tag given for this device.
Address :
Network
address.
Type
: Shows the identified actuator type as Q.
Network
: The network to which this device is connected (Pakscan 2 for two wire
loop).
This screen is accessible to Read, Write and Administration user levels.
Fig 36: Q actuator FCU Control
Actuator picture
Controls
Navigation
Next
Previou
Addres
Refres
