The Web Browser
45 of 82
Publication S703E V1.1
Issue 06/09
Pop-up screen shows the alarms on the actuator as red lights, grey is no alarm. Additional
information on the meaning of these alarms is contained in the individual field unit manuals.
Event Log - Available to all user levels
Pop-up screen showing a log of the last occasion on which the various control and alarm events
occurred. For commands, the source of the command is also given.
Remote selected
- local remote selector in remote position.
Moving
- actuator centre column moving.
Monitor Relay
- monitor relay alarm.
Open Limit
- open position limit switch.
Closed Limit
- closed position limit switch.
Comms Failed
- loss of network communication.
Thermostat
- motor thermostat tripped.
Torque Tripped
- torque limit level exceeded.
Manual move
- actuator moved by the handwheel.
POR
- power on reset.
Watchdog
- Field unit watchdog alarm.
AUX OR
- Auxiliary input present.
Start / Stop
- Failure to respond to a remote control input.
MemF
- FCU memory chip fault.
EOT
- Motor running at end of travel.
Network Open
- open instruction over the control network.
Network Close
- close instruction over the control network.
Network Stop
- stop instruction over the control network.
Close pop up
Controls
Fig 39: Q FCU Event Log
