The Web Browser
65 of 82
Publication S703E V1.1
Issue 06/09
generated and the specifying of a suitable SMTP server, whilst the second specifies which events will
cause messages to be sent.
Alarm Email Settings
Email Alarm
: Set to Enable or Disable the whole process.
SMTP Server
: Specifies the server that the master station will use for forwarding e-mails.
This is either a domain name or IP address for the server on which the
email account has been set.
SMTP
: If the domain server supports SMTP authentication then set this to Enable
Authentication
and complete the Authentication parameters. (More information on SMTP
Authentication can be found in Document RFC 4954 available on the
internet.)
Authentication Method - auto, plain, login or cram-md5, usually set to login.
Username - the email user name for the master station or an identifier
Password - the chosen verification password for authentication of the
messages from the master station to the server.
Sender
: A name to identify the master station. It could be the tag name.
Reply Path
: The email address for return messages i.e. when alarm e-mail messages
are replied to.
Test E-mail
: Enter a valid e-mail address to send a test message to, in order to ensure
the system is working correctly, then click on ‘Test’.
Controls
Test
: Sends a test e-mail to the specified address
Save Settings
: Saves the Alarm e-mail Settings.
FCU Alarm
This table lists the devices on the field network by address and tag number. The right hand side
box, when clicked, toggles between a tick and no tick. A tick indicates that if any alarm occurs
on this field unit, it will be reported by the e-mail or text facility.
Controls
Clear All
: Removes any ticks from all the boxes in the list.
Set All
: Adds a tick in all the boxes in the list.
Save Settings
: Saves the FCU Alarm list settings.
Event List
This table lists all the Master station and Option card alarms that can be used to initiate an
alarm e-mail or text. The list is split into two parts relating to the CPU module and the Option
module.
Controls
Save Settings
: Saves the Event List settings.
