P3F - Pakscan Master Station Technical Manual
26 of 82
Publication S703E V1.1
Issue 06/09
5.5.2
Master Station
The screen reports the current status of the master station and the option cards fitted. The coloured
lights show the condition of the associated parameter. Greyed out text and lights are not applicable or
else in a safe (normal) condition.
Master Station CPU Module
Site name
: The name of the site where the system is located as entered during
configuration.
Tag name
: The master station tag as entered during configuration.
Status
Module Health
: Indicates the absence (green light) or presence (red light) of a fault on the
this CPU.
ESD Presence
: Shows a yellow light if an Emergency Shut Down signal is active.
Alarm
: Indicates the presence of an alarm (red light) somewhere on the system.
Option 1
- Pakscan 2 Loop Option Module
Loopback in
: A blue light shows whilst the master station is reconfiguring the loop.
Progress
Loopback In use : A yellow light shows when the master station has detected a loopback fault
on the system.
Fig 21: Master Station Overview Page
Site Name
Option Card 1
Tag Name
Status
Status
Controls
This screen is accessible to Read, Write and Administration user levels.
