P3F - Pakscan Master Station Technical Manual
50 of 82
Publication S703E V1.1
Issue 06/09
Address :
Network
address.
Type
: Shows the identified device type as GPFCU-GP.
Network
: The network to which this device is connected (Pakscan 2 for two wire
loop).
Current Status
The real time status of the actuator is listed in this pane on the screen.
Digital # 1 to # 8
: Digital input signal status, active or Inactive.
Loopback
: Off or On.
Relay Type
: Fleeting or Maintained outputs from the relays.
Alarm Status
: No Alarm or Alarm.
Analogue Input 1 and 2
For the two analogue input channels, a bar graph shows the current actuator analogue position
between 0 and 100%.
Controls
Parameters - Viewable by all user levels
Pop-up screen shows the settings for all the parameters relating to the general purpose field
unit. For users with Administration level rights the values can be edited.
Controls
Save Settings
: Edited fields may be saved, accessible by
Administrator
level users only
Show Alarms - Viewable by all user levels
Pop-up screen shows the alarms on the actuator as red lights, grey is no alarm.
Fig 43: GP FCU Parameters
Fig 44: GP FCU Alarms
Close pop up
Close pop-up
