Ross Synergy 1, Maintenance Manual

Page: 153 / 240

Synergy 1 and Synergy 100 Maintenance Guide (v16-S1) Calibration and Diagnostics • 9–11
Button Test
The Button Test Menu allows you to test all pushbuttons on the Synergy 1 switcher.
Use the following procedure to test the buttons:
1. Navigate to the Panel Diagnostics Menu 1-2 as follows:
• Press
HOME
(to display the Main Menu 1-2 )
•
MORE
(to display Main Menu 2-2 )
•
Setup
(to display the Setup Menu )
•
Panel Diagnostics
(to display Panel Diagnostics Menu 1-2 )
2. Press
Button Test
to display the Button Test Menu .
Button Test Menu
3. Press each button, as required, on the Synergy 1 control panel.
4. Exit the menu by pressing both
Exit
buttons beneath the display.
This completes the procedure to pushbuttons on the Synergy 1 control panel.
Lamp Test
The Lamp Test Menu allows you to test large groups of buttons on the Synergy 1 control panel.
Use the following procedure to test the lamps:
1. Navigate to the Panel Diagnostics Menu 1-2 as follows:
• Press HOME (to display the Main Menu 1-2 )
• MORE (to display Main Menu 2-2 )
• Setup (to display the Setup Menu )
• Panel Diagnostics (to display Panel Diagnostics Menu 1-2 )
2. Press Lamp Test to display the Lamp Test Menu .
Lamp Test Menu