Roland TrueVIS VG3-540, User Manual

Page: 22 / 341

Level 1 Level 2 Level 3 Level 4 Details
[Preferences] [Media Edge Detection] Sets whether to detect the leading and trailing edges of
the media. When using transparent media, whose edges
cannot be detected, the media can be set up without de-
tecting the edges by selecting [Disable].
[Print Light] Select [On], [Off], or [Auto] for the print light. Select
[Auto] to automatically turn the light on/off according
to the status of the printer.
[Take-up] Sets the [Take-up Method] and [Take-up Direction] for
the take-up unit.
[Remaining Media Management] Sets the amount of remaining media that has been set up
and displays this amount. This amount can also be print-
ed on the media.
[Extended Dryer] These settings are required when using an auxiliary dry-
ing unit. Set them individually to [Enable] and [Disable].
[Blower Fan]
[Skewing Correction Support at Setup] Provides support, preventing skewed installation of the
media by making a sound and operating an automatic
suction fan during setup.
[Printing Test Position] Sets the direction for test pattern printing: [Feed] or
[Scan].
[Perforated Sheet Cutting] Sets the perforated sheet cutting conditions.
[Cleaning during Printing] Selects the frequency of cleaning during printing from
[No Cleaning], [Every Page], [Periodically (Job Priori-
ty)], and [Periodically (Time Priority)]. After selecting
[Periodically (Job Priority)] or [Periodically (Time Pri-
ority)], set the time from the previous cleaning to the
next cleaning.
[Standby Heater Temperature] Sets the heater temperature when media has not been
set up.
[Prefeeding at Output] Prefeeds the media when it is fed out, such as during
cutting, preventing the pulling of the media with undue
force.
[Priority for Cutting Settings] Sets whether to prioritize the cutting settings of the ma-
chine or the software RIP.
[Ink Circulation Interval]
*2 Sets the frequency of white ink circulation.
[Notifications On/Off] When [Enable] is selected, notifications are displayed at
the appropriate times.
• [Ink Mixing Notification]
• [Middle Pinch Roller Placement Notification]
• [Media Clamp Placement Notification]
[Sleep Time] Sets the time until sleep mode (the state in which the
power-saving features operate) activates.
[Reset to Factory Defaults] Returns all settings other than [Language] and [Units] to
their factory default values.
Part Names and Functions
Basic Information
21