Roland TrueVIS VG3-540, User Manual

Page: 280 / 341

2. Make adjustments according to the new blade.
Procedure
1.
Load the media.
2.
Tap [Move].
3.
Tap , , , or to move the cutting carriage to the location where you want to
carry out the cutting test.
You can freely set the location for the cutting test.
4.
Tap [Set Base Point Here].
You are returned to the home screen.
5.
Tap .
6.
Tap [Media Settings]>[Cutting Settings]>[Blade Adjustment].
7.
Tap [Execute] next to [Cutting Test].
The test pattern is cut.
8.
Check the results of the cutting test.
Check item Result Setting item Adjustment
Check the shape. The cut shape is distorted. [Cutting Speed] Reduce
Peel off the circle.
The square also peels off. [Blade Force] Increase
Some uncut areas remain. [Cutting Speed] Reduce
Peel off the square.
The blade leaves faint traces on the backing
paper.
[Blade Force]
No change
The blade trace is indistinct. Increase
The blade trace is too deep and cuts into the
backing paper.
Reduce
Replacing the Blade/Separating Knife
Replacing Consumable Parts
279