Roland TrueVIS VG3-540, User Manual

Page: 188 / 341

Correcting the Misalignment of Printing and Cutting
This is a correction method performed when printing followed immediately by cutting yields positioning for
printing and cutting that is slightly misaligned.
Print alignment marks, perform detection of the printed marks, and then correct the discrepancy. Subtle
misalignment between the printing and cutting positions may occur due to the thickness of the media or
the head height. We recommend that you make corrections to match the media you are using.
1. Adjust the misalignment of the ink landing position.
Procedure
1.
Load the media.
2.
Tap .
3.
Tap [Media Settings]>[Printing Settings]>[Media Gap Adjustment].
4.
Select [Simple Correction (Auto)] and tap [Next].
5.
Tap [Execute].
The test pattern is printed and the media gap is adjusted automatically.
6.
Tap [OK] when the completion screen appears.
7.
Perform the operations shown below according to the [Result].
• If [Successful] is displayed on the operation panel, tap to go back to the original
screen.
• If [Failed] is displayed on the operation panel, manually adjust the media gap.
RELATED LINKS
・
P. 155 Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjust-
ment)
Accurately Adjusting the Settings for Printing
and Cutting
Optimizing the Output Quality
187