manualshive.com logo in svg

Roland TrueVIS VG3-540, User Manual

The Roland TrueVIS VG3-540 is a cutting-edge large format printer that produces stunning graphics with ease. For detailed setup and operation instructions, be sure to download the free User Manual from manualshive.com. This manual will help you maximize the potential of your printer and achieve optimal results.

Share
Download
background image

Correcting the Misalignment of Printing and Cutting with Crop Marks (Concurrent Test for Printing

and Cutting with Crop Marks) ..................................................................................... 192

Correcting  the  Misalignment  of  Printing  and  Cutting  with  Crop  Marks  (Separate  Test  for  Printing/

Cutting with Crop Marks) .......................................................................................... 195

Correcting the Reading Sensor .......................................................................................... 199

Optimizing Work Efficiency .........................................................................................200

Managing the Media Settings ................................................................................................... 201

Changing the Media Settings............................................................................................. 201
Checking the Registered Media Settings ............................................................................... 203
Changing the Media Name ............................................................................................... 205
Duplicating Media Settings ............................................................................................... 206
Deleting Media Settings .................................................................................................. 207

Adjusting the Output-start Location .......................................................................................... 208

Setting the Base Point .................................................................................................... 208

Reducing Output Time .......................................................................................................... 210

Speeding Up Output for Narrow Media ................................................................................. 210

Other Useful Functions.......................................................................................................... 211

Using the Print Light (Interior Light) ................................................................................... 211
Performing Printing Tests Arranged Horizontally ..................................................................... 212

Optimizing Operation Management ...............................................................................213

Managing the Operations Appropriately and Efficiently ................................................................... 214

Setting the Current Date/Time and Using It for Maintenance...................................................... 214
Checking the Remaining Media .......................................................................................... 215
Showing/Hiding Notifications............................................................................................ 217
Setting the Activation Interval for Sleep Mode (Power-saving Feature) .......................................... 218

Managing the Basic Settings of the Printer .................................................................................. 219

Changing the Display Language ......................................................................................... 219
Changing the Units of Measurement.................................................................................... 220
Viewing Printer Information ............................................................................................. 221
Viewing Network Information ........................................................................................... 222
Adjusting the Brightness of the Operation Panel ..................................................................... 223
Turning Off Operation Panel Sounds .................................................................................... 224
Returning All Settings to Factory Defaults............................................................................. 225

Maintenance ..........................................................................................226

Introduction...........................................................................................................227

Important Notes on Handling and Use ........................................................................................ 228

Printer....................................................................................................................... 228
Ink Pouches ................................................................................................................. 228

Basic Maintenance Knowledge ................................................................................................. 229

Types and Timing of Maintenance....................................................................................... 229
Measures When the Printer Is Not in Use for a Prolonged Period .................................................. 231

Regular Maintenance ................................................................................................232

Print Head Check before Printing ............................................................................................. 233

Performing a Nozzle Drop-out Test ..................................................................................... 233

Cleaning the Machine ........................................................................................................... 234

Cleaning the Media Path.................................................................................................. 234
Cleaning the Knife Carriage Roller...................................................................................... 235

Cleaning around the Print Heads .............................................................................................. 236

Manual Cleaning Method ................................................................................................. 237
Consumable Products and Parts Related to Manual Cleaning ....................................................... 243

Disposing of Discharged Fluid ......................................................................................244

Precautions for Disposing of Discharged Fluid............................................................................... 245

Contents

3

Summary of Contents for TrueVIS VG3-540






















































































































































































































































































































































Reviews:

No comments

Related manuals for TrueVIS VG3-540

Xerox Legacy 4127 Customer Release Notes preview
Legacy 4127
Brand: Xerox Pages: 8
Oce im4530 Scanning Manual preview
im4530
Brand: Oce Pages: 136
Oce im4512 Facsimile Operation Manual preview
im4512
Brand: Oce Pages: 116
Konica Minolta bizhub 160 Parts Manual Manual preview
bizhub 160
Brand: Konica Minolta Pages: 35
GCC Technologies Elite 12/1200N Software Installation preview
Elite 12/1200N
Brand: GCC Technologies Pages: 8
Radio Shack Line Printer VIII Hardware Manual preview
Line Printer VIII
Brand: Radio Shack Pages: 54
Kyocera Ecosys FS-C5300DN Operation Manual preview
Ecosys FS-C5300DN
Brand: Kyocera Pages: 35
Oki F0305 User Manual preview
F0305
Brand: Oki Pages: 188
Lexmark X5495 Specifications preview
X5495
Brand: Lexmark Pages: 2
SPRT SP-POS88V User Manual preview
SP-POS88V
Brand: SPRT Pages: 18
GCC Technologies Elite 21DN+ Getting Started Manual preview
Elite 21DN+
Brand: GCC Technologies Pages: 80
IOGear GPSU21 Installation Manual preview
GPSU21
Brand: IOGear Pages: 48
Ricoh Mira-PJ1 Field Service Manual preview
Mira-PJ1
Brand: Ricoh Pages: 70
Oki ES3032a4 User Manual preview
ES3032a4
Brand: Oki Pages: 72
Xerox DocuColor 240 Settings Manual preview
DocuColor 240
Brand: Xerox Pages: 6
Dremel 3D40 Idea Builder Quick Start Manual preview
3D40 Idea Builder
Brand: Dremel Pages: 2
Bang & Olufsen BEOLINE Quick Start Manual preview
BEOLINE
Brand: Bang & Olufsen Pages: 4
Costar LabelWriter BC User Manual preview
LabelWriter BC
Brand: Costar Pages: 38

Brands by name

Popular brands

Load more brands