Roland TrueVIS VG3-540 User Manual Download

Page: 23 / 341

Level 1

Level 2

Level 3

Level 4

Details

[System Informa-
tion]

[Machine Information]

Displays the [Model], [Serial Number], [Ink Type],
[Firmware Version], and [MAC Address].

[Network]

Sets the [Obtain IP Address Automatically], [IP Ad-
dress], [Subnet Mask], and [Default Gateway] to con-
nect the machine to a computer.

[Units]

Sets the [Length] and [Temperature].

[Language]

Sets the language to Japanese, English, French, Italian,
German, Spanish (Europe), or Spanish (South America).

[Date/Time]

Sets the year, month, day, hour, minute, and second dis-
played on the operation panel.

[Screen Brightness]

Sets the brightness of the operation panel's screen.

[Screen Operation Sound]

Turns the operation sound of the operation panel on/off.

[License]

Displays the license information of the operation panel.

This setting only appears when media is loaded.

This menu item is only displayed on machines when the ink type includes white ink.

Part Names and Functions

Basic Information

Summary of Contents for TrueVIS VG3-540






















































































































































































































































































































































Search results

Summary of Contents for TrueVIS VG3-540

Reviews:

Related manuals for TrueVIS VG3-540

Brands by name

Popular brands

Roland TrueVIS VG3-540, User Manual

Search results

Summary of Contents for TrueVIS VG3-540

Reviews:

Related manuals for TrueVIS VG3-540

Brands by name

Popular brands