Roland SP-404MK2 Reference Manual Download

Page: 129 / 136

Appendix

129

While holding down

the [SHIFT] button

Function

Explanation

→

“

Setting the Tempo in Time with the Rhythm (Tap Tempo)

(P.76)”

Pad [12]

GAIN

Displays the UTILITY MENU > SYSTEM > GAIN tab.

→

“

GAIN

(P.110) tab”

Pad [13]

UTILITY

Displays the UTILITY MENU screen.

→

“

Configuring the Various Settings (UTILITY)

(P.91)”

Pad [14]

IMPORT/EXPORT Displays the UTILITY MENU > IMPORT (IMPORT/EXPORT MENU).

→

“

Importing Samples (IMPORT SAMPLE)

(P.101)” “

Exporting Samples

(EXPORT SAMPLE)

(P.102)” “

Importing a Project (IMPORT PROJECT)

(P.103)”

“

Exporting a Project (EXPORT PROJECT)

(P.104)”

Pad [15]

PAD SETTING

Displays the UTILITY MENU > PAD SET (PAD SETTING).

→

“

Configuring the Pad-related Settings (PAD SETTING)

(P.92)”

Pad [16]

EFX SETTING

Displays the UTILITY MENU > EFX SET (EFX SETTING) screen.

→

“

Configuring the Effect Settings (EFX SET)

(P.93)”

[REVERSE]

Pads [1]–[16]

PAD MUTE

Switches the pad mute on/off.

→

“

Muting the Playback of a Sample (PAD MUTE)

(P.22)”

[BUS FX] button

MUTE BUS

Temporarily turns off the audio sent to the bus (the sample playback sound or

the sound inputted to the INPUT jack), and outputs only the sound of the
effect.

→

“

Temporarily Output Only the Effect Sound (MUTE BUS)

(P.33)”

[HOLD] button

PAUSE

Pauses the sample that’s currently playing back.

→

“

Pausing the Sound of a Sample (PAUSE)

(P.25)”

[EXT SOURCE] button

INPUT SETTING

Displays the input settings screen.

→

“

Configuring the Sampling Settings (RECORD SETTING)

(P.35)”

[SUB PAD] button

PROJECT

Displays the SELECT PROJECT screen.

→

“

Selecting a Project

(P.83)”

Shortcuts that use the [REMAIN] button

While holding down the

[REMAIN] button

Function (explanation)

Pads [1]–[16]

Sets which sample playback audio is sent to which bus (meaning which effects are used) for

each sample.

→

“

Deciding on Effects to Use for Each Sample

(P.29)”

CH1: Pad [14]

CH2: Pad [16]

(only in DJ mode)

You can set the bus to which the CH1/CH2 sample playback is sent (meaning which effects

are used).
While holding down the [REMAIN] button, each time you press pad [14] or pad [16] switches
the effect to use as follows: “BUS-1”

→

“BUS-2”

→

“DRY”

→

“BUS-1”.

BANK [A/F]–[E/J] buttons

Sets the bus send destination for all samples in a bank.

[MFX] button

Makes the effect edit screen keep displaying.

→

“

Editing the Effects

(P.31)”

[BUS FX] button

You can swap the effects of BUS 1 and BUS 2.

Shortcuts that use the [VALUE] knob

While holding down the [VALUE] knob

Function (explanation)

Effect buttons ([DRIVE]–[MFX]

button)

Applies effects only while you hold down the effect buttons (EFFECT GRAB).

→

“

Turning Effects On/Off at the Desired Timing

(P.32)”

[BUS FX] button

Temporarily bypasses BUS 3 and BUS 4.

Pads [1]–[16]

Selects a sample (no sound is produced).

Also, when the [PATTERN SELECT] button is lit, select a pattern (the pattern will

not be played).

Shortcuts that use the [DEL] button

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands