Roland SP-404MK2 Reference Manual Download Page 78

Page: 78 / 136

Mixing the Samples (DJ MODE)

Controller

Parameter

Action

CH2: Pad [4]
CH1: Pad [6]

CH2: Pad [8]

BPM-

Slows down the tempo.

CH1: [DEL]

Pad [2] + Pad [6]

CH2: [DEL]

Pad [4] + Pad [8]

BPM

Resets the tempo to the default value.

CH1: Pad [1]
CH2: Pad [3]

BEND+

The pitch goes up while you hold down the pad. This also speeds up the
playback, like an analog turntable.

CH1: Pad [5]

CH2: Pad [7]

BEND-

The pitch goes down while you hold down the pad. This also slows down the

playback, like an analog turntable.

CH1: [REMAIN] button

+ Pad [14]

CH2: [REMAIN] button
+ Pad [16]

BUS FX

You can set the bus to which the CH1/CH2 sample playback is sent (meaning
which effects are used).

While holding down the [REMAIN] button, each time you press pad [14] or pad
[16] switches the effect to use as follows: “BUS-1”

→

“BUS-2”

→

“DRY”

→

“BUS-

1”.

[HOLD] button

Switches between DJ mode and pad mode.
Pad mode is a feature that lets you play back samples by pressing pads in DJ

mode.

You can press pads to play back samples, as long as the sample in question is

not being used in DJ mode.

CH1: [ROLL]
Pad [13]

CH2: [ROLL]

Pad [15]

Repeats the sample playback in more detailed intervals (ROLL).
Note that when the ROLL SIZE (roll interval) is longer than the sample length, a

roll cannot played back.

[SHIFT]

[ROLL] button

ROLL SIZE

Sets the roll interval (1/4, 1/2, 1 or 2 measures).

Set the ROLL SIZE before playing back rolls. (You can’t change the ROLL SIZE

with this operation while a roll is playing back).

[ROLL] Pads

[1]–[4]

Changes the roll interval while the roll is playing back.

[ROLL] Pad [1]: 1/4 (measures)

[ROLL] Pad [2]: 1/2 (measures)

[ROLL] Pad [3]: 1 (measure)

[ROLL] Pad [4]: 2 (measures)

[START/END] button

Crossfader

You can make CH2 fade in while CH1 is fading out, or the opposite (crossfade).

Editing a sample

You can edit the samples that are used in DJ mode.

Press the [VALUE] knob.

A menu appears.

Use the [VALUE] knob to select “CH1 EDIT” or “CH2 EDIT”, and press the [VALUE] knob.

The sample edit screen appears. The editing method is the same as for sample edit in sample mode.

Controller

Action

[CTRL 1] knob

Moves the start point.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands