Roland SP-404MK2 Reference Manual Download

Page: 115 / 136

Appendix

115

DJFX Looper

This effect loops the sound in short cycles.

You can vary the playback direction and playback speed of the input sound to get a turntable-type effect.

Parameter

Value

Explanation

LENGTH

0.230–0.012

(sec)

Sets the length of the loop.

SPEED

-100–100

Sets the playback direction and playback speed.

The loop plays backward when this is set to a negative value, stops when this is set to zero,
and plays forward when this is set to a positive value.

LOOP SW

OFF, ON

Turn this ON while a sound is playing to make the sound play back in a loop, at a length

specified by the LENGTH parameter.

Turn this OFF to disable the loop.

Scatter

This effect swaps the sound played back by a loop in steps, altering its playback direction and gate length. This gives you the loop
playback a digital groove feeling.

Parameter

Value

Explanation

TYPE

1–10

Sets the scatter type.

DEPTH

10, 20, 30, 40, 50, 60, 70, 80, 90, 100

Adjusts the scatter depth.

SCATTER

OFF, ON

Switches the scatter effect on/off.

SPEED

SINGLE, DOUBLE

Sets the scatter speed.

Downer

Cyclically slows down the audio playback speed.

Parameter

Value

Explanation

DEPTH

0–100

Sets how much the playback speed should be slowed down.

RATE

1/32, 1/16, 1/8, 1/4,
1/2, 1, 2

Sets the period at which the playback speed is changed.

FILTER

0–100

Attenuates the high-frequency range.

PITCH

OFF, ON

When this is turned ON, pitches that were lowered due to the change in speed are

converted to their original pitch.

RESONANCE 0–100

Adjusts the filter’s resonance level.

Increasing the value further emphasizes the effect, for a more unusual sound.

Ha-Dou

This effect generates a wave-like sound based on the input audio.

Parameter

Value

Explanation

MOD

DEPTH

0–100

Adjusts the depth of the effect sound.

TIME

0–100

Sets the length of the effect sound.

LEVEL

0–100

Adjusts the volume of the effect sound.

LOW CUT

FLAT, 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315,

400, 500, 630, 800 (Hz)

Sets the frequency range at which the effect

sound is attenuated.

HIGH CUT

630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000,

6300, 8000, 10000, 12500, FLAT (Hz)

PRE DELAY

0–100

Sets the time it takes for the effect to sound.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands