Roland SP-404MK2 Reference Manual Download

Page: 122 / 136

Appendix

122

Parameter

Value

Explanation

NOTE

-17– -1, 1–18

Sets which note in the chromatic scale should resonate, counting from the

root of the SCALE value.

SPREAD

UNISON, TINY, SMALL,

MEDIUM, HUGE

Sets the octave of the resonator.

CHARACTER 0–100

Adjusts the brightness and detuning of the sound.

SCALE

C maj–B maj, C min–B min

Sets the composite notes (chord) to resonate.

FEEDBACK

0–99 (%)

Adjusts the amount of feedback for the effect.

ENV MOD

0–100

Larger values increase the amount of feedback according to the input level.

Ring Mod

This effect alters the tonal character to make the sound more metallic.

Parameter

Value

Explanation

FREQUENCY

0–100

Sets the frequency range to which the effect is applied.

SENS

0–100

Adjusts the volume of the effect sound.

BALANCE

100-0–0-100 (%)

Adjusts the volume balance between dry (the original sound) and effect sound.

POLARITY

OFF, ON

Sets the direction in which the frequency modulation moves.

EQ LOW

-15–15 (dB)

Adjusts the amount of boost/cut of the low-frequency range.

EQ HIGH

-15–15 (dB)

Adjusts the amount of boost/cut of the high-frequency range.

Crusher

Produces a lo-fi effect.

Parameter

Value

Explanation

FILTER

331–15392

(Hz)

Sets the frequency range in which the pre-filter (the filter that the sound passes through

before effects are applied) works.

RATE

0–100

Sets the sample rate of the effect. Larger values make the sample rate lower, for a more lo-fi
sound.

BALANCE

100-0–0-100

(%)

Adjusts the volume balance between dry (the original sound) and effect sound.

Overdrive

Mildly distorts the sound.

Parameter

Value

Explanation

DRIVE

0–100

Adjusts the amount of distortion.

TONE

-100–100

Sets the tone. Larger settings emphasize the high-frequency range. Smaller settings

emphasize the low-frequency range.

BALANCE

100-0–0-100

(%)

Adjusts the volume balance between dry (the original sound) and effect sound.

LEVEL

0–100

Adjusts the volume of the effect sound.

Distortion

Intensely distorts the sound.

Parameter

Value

Explanation

DRIVE

0–100

Adjusts the amount of distortion.

TONE

-100–100

Sets the tone. Larger settings emphasize the high-frequency range. Smaller settings
emphasize the low-frequency range.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands